Four Points to Remember when Buying HDMI Cables


If you are in the market for HDMI cable, you have probably observed that these cables vary in prices, making it challenging to know which one to purchase. HDMI is quite easy to connect various audiovisual items together. Today, it’s usually the only way to make an HD-capable connection. While the majority of televisions still come with component input, it is no longer available on Blu-ray players. When purchasing HDMI cables, you need to consider some few points including the following:

HDMI Versions

HDMI continues to evolve. The market has been introducing many versions from 1.0 to 1.4 and 2.0 onwards. Every new version comes with new capabilities. But, when a piece of equipment comes with the latest HDMI version, it does not have to mean it supports all features. Thus, you need to look at the list of features. The latest HDMI versions support 4K video and if you need this, check the ability of the cable to support a high release. But, when you only need a cable for a simple connection, you would not care much about this feature.


Although good and bad cables do not have a difference in terms of picture quality, they may differ in build quality. Thus, the cables may stand up to more use. The only problem is probably when the cable flexes and moves repeatedly. Generally, most low cables are quite dependable. Check out options at

Required Length

A lot of cables must only connect between connectors that are near each other. Cables that are 0.6, 0.9, 1.5, and 1.8 metres long are available. In case you need to install and leave the cable, you will need to get the shortest cable possible which eliminates the need to coil up the unwanted length which can leave an unsightly coil. However, it is important to ensure that any shorter cable will reach from point A to point B. When measuring cable length, leave a little extra to accommodate bend radii. Also, a longer lead is preferable in case you need to change the set-up later.

Longer Cable Runs

The majority of HDMI cables are up to two metres or so which is generally enough for most system. In some cases, HDMI cables need long runs. Cables that are at least 10 metres long are available. If you need a very long cable, you must have an active cable with an amplifier to boost the signal and equalise it.